Monday, July 25, 2011

Some Tips For Using Windows Sound Recorder

Record at CD Quality:
By default, Windows Sound Recorder records using Radio Quality - this produces static and crackling in the file. In order to produce a CD Quality recording, the properties of the audio file must be set correctly before recording:

1. Open Sound Recorder which is found in:
Start/All Programs/Accessories/Entertainment/Sound Recorder.
2. Choose File, then Properties.
3. Click [Convert Now..].
4. Use the drop-down menu under Name. From the list, choose CD Quality.
5. Click [OK] twice to return to the main Sound Recorder window.
6. Save the file.
7. Once the file is saved, it is set as a CD Quality audio file - the file will still be open in Sound Recorder.
8. Start recording and save the file when complete.

Stopping the feedback:
If the computer makes a squealing sound when recording (called feedback) it is most likely caused by the microphone being enabled in both the Sound playback and Sound recording volume controls. To correct, open Sounds and Audio Devices from Control Panel. On the Audio tab, open the Sound playback volume control and mute the microphone. The microphone should be selected on the Sound recording volume control.

Set Power Scheme to avoid drop-outs:
Power Schemes are found by opening Power Options from Control Panel. The default Power Scheme for most mobile computers is Portable/Laptop. With the Portable/Laptop Power Scheme, the computer may slow the processor in order to save power. This can cause clicks or drop-outs in recordings. To fix this, set the Power Scheme to Always On. The Always On scheme does not slow the processor.

Note: Change the Power Scheme back to Portable/Laptop when finished recording in order to avoid excessive battery drain.


  1. nice work. visit me back.

  2. An awesome article, thanks for sharing it.

    HD Cafe